 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN8127 ECH8611 P-Channel Silicon MOSFET ECH8611 Features * * * General-Purpose Switching Device Applications Low ON-resistance. Ultrahigh-speed switching. 1.8V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board(900mm2!0.8mm)1unit Mounted on a ceramic board(900mm2!0.8mm) Conditions Ratings --12 9 --5 --40 1.3 1.5 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Conditions ID= --1mA, VGS=0 VDS= --12V, VGS=0 VGS=7.2V, VDS=0 VDS= --6V, ID= --1mA VDS= --6V, ID= -2.5A ID= --2A, VGS= --4.5V ID= --1A, VGS= --2.5V ID= --0.5A, VGS= --1.8V VDS= --6V, f=1MHz VDS= --6V, f=1MHz VDS= --6V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --12 --10 10 --0.3 6.6 9.5 30 45 66 1230 380 330 16 190 110 120 40 65 95 --1.0 typ max Unit V A A V S m m m pF pF pF ns ns ns ns Marking : FD Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21005PE TS IM TA-100402 No.8127-1/4 ECH8611 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS= --6V, VGS= -4.5V, ID= --5A VDS= --6V, VGS= -4.5V, ID= --5A VDS= --6V, VGS= -4.5V, ID= --5A IS= --5A, VGS=0 Ratings min typ 12 1.5 3.7 --0.85 --1.5 max Unit nC nC nC V Package Dimensions unit : mm 2206B 0.25 Electrical Connection 8 7 6 5 0.3 8 5 0.15 0.65 2.9 0.25 1 4 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 1 2 3 4 2.3 2.8 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : ECH8 Top view Switching Time Test Circuit VIN 0V --4.5V VIN VDD= --6V ID= --3A RL=2 VOUT 0.07 0.9 D PW=10s D.C.1% G ECH8611 P.G 50 S No.8127-2/4 ECH8611 --5.0 ID -- VDS --4.5V --4.0V --10 --9 ID -- VGS VDS= --6V --3.5 --3.0 V V --1 .8 --4.5 --4.0 V --1.5V --8 Drain Current, ID -- A Drain Current, ID -- A --3.5 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 --7 --6 --5 --4 --2 --1 VGS=0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0 0 0.5 1.0 1.5 2.0 IT08394 Drain-to-Source Voltage, VDS -- V 100 IT08393 100 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V RDS(on) -- Ta .8V Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 90 80 70 60 50 40 30 20 10 0 0 90 80 70 60 50 40 30 20 10 0 --75 --50 --25 0 25 50 75 100 125 150 175 ID= --2A --1A --0.5A --0 I D= .5 --1 S= A, VG Ta = 75 --3 I D= = --2 , VGS --1.0A 2.0A I D= -- = --4.5 , V GS --2 --4 --6 Gate-to-Source Voltage, VGS -- V --8 IT08395 5 yfs -- ID Ambient Temperature, Ta -- C 3 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 C 25 --25 C C .5V V IT08396 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S VDS= --6V 3 10 7 5 3 2 75 C 25 C 1.0 7 --0.1 7 5 2 3 5 7 --1.0 2 3 Drain Current, ID -- A 5 7 --10 2 --0.01 7 5 3 2 --0.001 --0.2 --0.3 --0.4 --0.5 Ta= --0.6 --0.7 --25 C --0.8 25 C Ta= 5 --2 C 75 C Forward Current, IF -- A 2 --0.9 --1.0 --1.1 IT08397 5 3 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V IT08398 VDD= --6V VGS= --4.5V Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 3 2 2 td(off) 100 7 5 3 2 Ciss 1000 7 5 tf tr Coss Crss 3 2 td(on) 10 7 100 2 3 2 --1.0 Drain Current, ID -- A 5 7 3 5 7 0 --2 --4 --6 --8 --10 --12 IT08400 IT08399 --0.1 Drain-to-Source Voltage, VDS -- V No.8127-3/4 ECH8611 --4.5 VGS -- Qg Gate-to-Source Voltage, VGS -- V VDS= --6V --4.0 ID= --3A --3.5 --100 7 5 3 2 ASO IDP= --40A <10s 1m ID= --5A 10 s Drain Current, ID -- A --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 2 4 6 8 10 12 14 IT08401 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 10 ms DC 0m s op era tio n Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 1unit 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 --0.01 --0.01 Total Gate Charge, Qg -- nC 1.8 PD -- Ta Mounted on a ceramic board(900mm2!0.8mm) 1unit Drain-to-Source Voltage, VDS -- V IT08402 Allowable Power Dissipation, PD -- W 1.6 1.5 1.4 1.3 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 To t al Di 1u ss ip nit ati on Ambient Temperature, Ta -- C IT08403 Note on usage : Since the ECH8611 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2005. Specifications and information herein are subject to change without notice. PS No.8127-4/4 |
Price & Availability of ECH8611
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |